论武器装备命名的特点

武器装备命名研究在我国是一个比较新的课题。宏观上分析武器装备命名的特点有助于确立新课题的框架,为进一步深入研究奠定基础。总体而言,武器装备命名有着政治、军事、民族、历史四个方面的特点。     

动初级高速六相直线感应电机工作特性分析

为了准确刻画对象模型,采用一阶等效电路瞬态涡流分析法对动态边端效应影响下动初级高速六相直线感应电机的参数时变规律进行了定量计算,并通过感应涡流损耗推导得到考虑动态边端效应时电机的等效电路。基于此,通过电磁推力计算及效率评估对动态边端效应影响下电机的工作特性进行了详细分析。利用不同运行速度条件下的有限元仿真及动态实验验证了理论分析和推导的正确性。     

气氧甲烷溅板式层板喷注器燃烧特性试验分析

采用试验方法分别对单喷嘴和多喷嘴溅板式层板喷注器燃烧特性进行研究,考察不同工况下喷注器面板热载情况,得到不同混合比、不同结构参数对燃烧室压力分布和燃烧效率的影响规律。试验结果表明:混合比对多喷嘴喷注器燃烧室压力影响不大,但对燃烧效率有较大影响。对于单喷嘴喷注器,燃烧效率随着混合比的增加而增高。相同条件下,增大扩张角及出口层宽度有利于提高喷注器燃烧效率,但会引起喷注面板热载增大,各喷注器喷注面板均产生不同程度的变形或失效。该结果对于正确指导层板式喷注器的设计以及筛选喷注器结构具有重要意义。     

Study on energy release characteristics of reactive material casings under explosive loading

Reactive Materials (RMs), a new material with structural and energy release characteristics under shock-induced chemical reactions, are promising in extensive applications in national defense and military fields. They can increase the lethality of warheads due to their dual functionality. This paper focuses on the energy release characteristics of RM casings prepared by alloy melting and casting process under explosive loading. Explosion experiments of RM and conventional 2A12 aluminum alloy casings were conducted in free field to capture the explosive fireballs, temperature distribution, peak overpressure of the air shock wave and the fracture morphology of fragments of reactive material (RM) warhead casings by using high-speed camera, infrared thermal imager temperature and peak overpressure testing and scanning electron microscope. Results showed that an increase of both the fireball temperature and air shock wave were observed in all RM casings compared to conventional 2A12 aluminum ally casings. The RM casings can improve the peak overpressure of the air shock wave under explosion loading, though the results are different with different charge ratios. According to the energy release characteristics of the RM, increasing the thickness of RM casings will increase the peak overpressure of the near-field air shock wave, while reducing the thickness will increase the peak overpressure of the far-field air shock wave.     

【专题】智能化导弹质量检测方法研究

导弹是由各种类型装备组成的综合性很强的复杂系统,智能技术的引入进一步丰富了智能导弹质量特性的内涵,对质量检测和控制提出了更高要求,需要开发与之相适应的检测方法。本文先给出了智能导弹的定义和内涵,分析了其智能特性,接着概述了智能化导弹的结构组成,分析了各智能部件的功能和结构组成,从智能化导弹结构组成及测试参数、智能化部件的嵌入式软件作用、零部件机械加工精度等方面提出了智能化导弹质量检测的需求,并在此基础上结合智能化制造等技术提出了在线检测、自动检测/测试、BIT自检、软件测评技术以及弹载遥测的智能化导弹质量检测途径和方法。     

预报风强度对火箭最大气动载荷精度影响及建模分析

针对不同预报风强度的精度以及其对应的最大气动载荷预报值精度的研究文献极少。以某地区实况风为基准,分别对不同预报风强度的精度以及其对应的最大气动载荷预报值精度特征进行了分析,并利用多元线性回归方法建立了订正模型,结果表明在预报日数第1～11天,预报风强度越大,预报风精度及其对应的最大气动载荷预报值精度越高;利用多元线性回归方法可提高最大气动载荷预报值精度,且预报风强度越小,最大气动载荷预报精度提高越明显。这些发现在火箭发射前的飞行保障及安全决策方面具有参考价值。     

影响柴油机喷雾数值模拟精度的若干因素分析

为探明影响柴油机喷雾数值模拟精度的若干因素,采用通用商业软件FLUENT对柴油机喷雾特性进行了CFD模拟计算,分别研究了网格尺寸、喷雾粒子数和最大时间步长对油束几何形状及油束贯穿距的影响.结果表明,网格划分的精度和喷雾粒子数量的多少对计算结果的正确性和油束的几何形状有直接的影响,网格尺寸过大或喷雾粒子数过少则喷雾几何形状失真.最大时间步长对数值模拟的精度在一定的范围内影响是比较小的.     

仿生偏振光导航传感器量测模型研究

仿生偏振导航传感器仿照昆虫利用天空偏振光进行导航的原理,测量载体的姿态和方位,具有精度高、功耗低等优势,是一种新型的导航传感器．根据偏振导航的原理分析偏振导航传感器的测量参考矢量和导航能力,根据其参考矢量的数量及性质,对偏振导航传感器使用在不同性质载体上的测量进行建模,并提出其对载体进行定姿的条件．     

中国特色社会主义事业发展布局的创新与发展

十八大首次将经济、政治、文化、社会和生态五大建设并列,强调“五位一体”建设中国特色社会主义。由此,中国特色社会主义发展布局历经四个阶段,即：“一个中心,两个基本点”的战略布局,“三位一体”发展布局,“四位一体”发展布局,“五位一体”发展布局。“五位一体”总体布局是一个相互联系、相互协调、相互促进、相辅相成的有机整体,对于开创中国特色社会主义事业新局面意义重大,为到本世纪中叶基本实现社会主义现代化,提供了有力支撑。     

Analysis on damage characteristics and detonation performance of solid rocket engine charge subjected to jet

To further explore the damage characteristics and impact response of the shaped charge to the solid rocket engine (SRE) in storage or transportation, protective armor was designed and the shelled charges model (SCM)/SRE with protective armor impacting by shaped charge tests were conducted. Air overpressures at 5 locations and axial acceleration caused by the explosion were measured, and the experimental results were compared with two air overpressure curves of propellant detonation obtained by related scholars. Afterwards, the finite element software AUTODYN was used to simulate the SCM impacted process and SRE detonation results. The penetration process and the formation cause of damage were analyzed. The detonation performance of TNT, reference propellant, and the propellant used in this experiment was compared. The axial acceleration caused by the explosion was also analyzed. By comprehensive comparison, the energy released by the detonation of this propellant is larger, and the HMX or Al particles contained in this propellant are more than the reference propellant, with a TNT equivalent of 1.168–1.196. Finally, advanced protection armor suggestions were proposed based on the theory of woven fabric rubber composite armor (WFRCA).